Sitemap- Royal Oak, MI - United Resin
Formulating Epoxy Systems for more than 40 years
800.521.4757urcepoxy@unitedresin.com
Epoxy Adhesives & Epoxy Resin Systems > Prototyping, Tooling, Laminating Compounds > Casting Systems > Uni-Cast M.C. Resin with 210 Hardener  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Uni-Cast M.C. Resin with 210 Hardener



Uni-Cast M.C. Resin with 210 Hardener is an iron-filled abrasion resistant compound used where heavy section casting is required. Its slow cure provides negligible shrinkage, excellent heat dissipation and a low coefficient of expansion.





Specification Chart
POT LIFE
MINUTES
(100 grams Mass)
MAX. USE TEMP.
ºF
HARDNESS
SHORE "D"
@ 72 ºF
MIXING RATIO
(Parts by Weight)
RESIN /HARDENER
MIXED VISCOSITY
CPS @ 72 ºF
COMPRESSIVE STRENGTH
PSI
FLEXURAL
STRENGTH
PSI
TENSILE
STRENGTH
PSI
CTE
In/In/°F
x 10-5
120 250 85 100/7 14,350 29,000 8,500 7,200 2.10