Sitemap- Royal Oak, MI - United Resin
Formulating Epoxy Systems for more than 40 years
800.521.4757
urcepoxy@unitedresin.com
Home
About Us
Products
Electronic Assembly Products
Sealants, Adhesives, Repair Products
Prototyping, Tooling, Laminating Compounds
Applications
Electronics
Aerospace, Marine, Automotive, Tooling
Adhesive and Specialty Systems
Encapsulating and Potting Resins
Literature
Contact Us
USA Contacts
China Distributors
Request Information
Tweet
Epoxy Adhesives & Epoxy Resin Systems
>
Prototyping, Tooling, Laminating Compounds
>
Casting Systems
>
Item # 1
Printable Page
Email This Page
Save To Favorites
Please wait…
Item # 1, Uni-Cast M.S. Resin with 215 Hardener
larger image
Uni-Cast M.S. Resin with 215 Hardener is a very hard, glass corundum filled material used where high impact and abrasion resistance is required. The material has excellent dimensional stability with thermal and mechanical shock properties. The material can be cast up to 1" thick against metal surfaces and cures with low exotherms.
Specification Chart
POT LIFE
MINUTES
(100 grams Mass)
MAX. USE TEMP.
ºF
HARDNESS
SHORE "D"
@ 72 ºF
MIXING RATIO
(Parts by Weight)
RESIN /HARDENER
MIXED VISCOSITY
CPS @ 72 ºF
COMPRESSIVE STRENGTH
PSI
FLEXURAL
STRENGTH
PSI
TENSILE
STRENGTH
PSI
CTE
In/In/°F
x 10
-5
120
250
90
100/15
8,000
38,000
20,500
9,600
3.70
Copyright © 2013 United Resin Corporation, All Rights Reserved
Site created by
Thomas Web Solutions
and Powered by
Navigator Platform