Exit
Uni-Gel S.C. 90 Resin with TP-41F Hardener is a white, room temperature cure, epoxy surface coat. It has good bonding properties, holds well on vertical surfaces and its viscosity allows it to be easily measured through a dispenser. It is highly recommended for plastic faced plasters and renders a hard surface. This system is also available in a thin version suitable for spray applications.
Unit of Measure

Specification Chart

Specification Chart

N/A
POT LIFE
MINUTES
(100 grams Mass)
MAX. USE TEMP.
ºF
HARDNESS
SHORE "D"
@ 72 ºF
MIXING RATIO
(Parts by Weight)
RESIN /HARDENER
MIXED VISCOSITY
CPS @ 72 ºF
COMPRESSIVE STRENGTH
PSI
FLEXURAL
STRENGTH
PSI
TENSILE
STRENGTH
PSI
CTE
In/In/°F
x 10-5
20 250 90 100/14 170,000/
15,000 (thin)
16,800 7,000 5,100 4.8