Sitemap- Royal Oak, MI - United Resin
Formulating Epoxy Systems for more than 40 years
800.521.4757
urcepoxy@unitedresin.com
Home
About Us
Products
Electronic Assembly Products
Sealants, Adhesives, Repair Products
Prototyping, Tooling, Laminating Compounds
Applications
Electronics
Aerospace, Marine, Automotive, Tooling
Adhesive and Specialty Systems
Encapsulating and Potting Resins
Literature
Contact Us
USA Contacts
China Distributors
Request Information
Tweet
Epoxy Adhesives & Epoxy Resin Systems
>
Prototyping, Tooling, Laminating Compounds
>
Laminating Systems
>
Uni-Heat Resin with 118 & 203 Hardeners
Printable Page
Email This Page
Save To Favorites
Please wait…
Uni-Heat Resin with 118 & 203 Hardeners
larger image
Uni-Heat Resin with 118 & 203 Hardeners are high heat laminating systems especially designed for most high temperature tooling applications. It also works well where vacuum bag construction is used. It cures at room temperature or can be heat cycle cured. Post curing is required to obtain maximum deflection temperatures. Uni-Heat with 118 meets MIL Spec. S-83430A.
Specification Chart
POT LIFE
MINUTES
(100 grams Mass)
MAX. USE TEMP.
ºF
HARDNESS
SHORE "D"
@ 72 ºF
MIXING RATIO
(Parts by Weight)
RESIN /HARDENER
MIXED VISCOSITY
CPS @ 72 ºF
COMPRESSIVE STRENGTH
PSI
FLEXURAL
STRENGTH
PSI
TENSILE
STRENGTH
PSI
CTE
In/In/°F
x 10
-5
60
350
90
100/20
1,900
40,500
35,600
8,000
0.90
180
500
90
100/30
1,850
40,500
35,600
8,500
0.92
Copyright © 2013 United Resin Corporation, All Rights Reserved
Site created by
Thomas Web Solutions
and Powered by
Navigator Platform