Sitemap- Royal Oak, MI - United Resin
Formulating Epoxy Systems for more than 40 years
800.521.4757urcepoxy@unitedresin.com
Epoxy Adhesives & Epoxy Resin Systems > Prototyping, Tooling, Laminating Compounds > Laminating Systems > Uni-Lam RTL Resin with PT-60F Hardener  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Uni-Lam RTL Resin with PT-60F Hardener



Uni-Lam RTL Resin with PT-60F hardener is a room temperature curing system, with excellent dimensional stability. It has excellent wet-out qualities when laminating with glass cloth. The material will not sag on the vertical surfaces, nor will it shrink. It is approved for automotive and aerospace applications.





Specification Chart
POT LIFE
MINUTES
(100 grams Mass)
MAX. USE TEMP.
ºF
HARDNESS
SHORE "D"
@ 72 ºF
MIXING RATIO
(Parts by Weight)
RESIN /HARDENER
MIXED VISCOSITY
CPS @ 72 ºF
COMPRESSIVE STRENGTH
PSI
FLEXURAL
STRENGTH
PSI
TENSILE
STRENGTH
PSI
CTE
In/In/°F
x 10-5
35 250 85 100/20 3,000 40,000 29,443 5,500 1.48